Press play to see the Servo-Omni DVD video

NEW! Cuts & Marks Roof Truss Components From 11″ to 20′ Long

The new Servo-Omni is a dramatically enhanced version of its predecessor, Auto-Omni. It retains all of the robotic, machine-tool design mechanisms of Auto-Omni, but is now servo-controlled. The following description highlights the enhanced features and abilities of Servo-Omni as compared to Auto-Omni.

• Set-up time is approximately 2 1/2 times faster than Auto-Omni - typically, 6 to 10 seconds per set-up average which translates to about 1 1/2 to 2 hours more cutting production per shift

• Transport speed (adjusts for component length) is 162% faster

• 18 servo control system - rapid, simultaneous movement of Transport (back & forth) and cutting heads (telescoping, elevating, and angle rotation)

• Transport and cutting head movements are smooth, deliberate and extremely fast – speed is ramped up at the start, then ramped down as the called-for position is approached stopping "spot on" without position hunting

• Set-up times are not affected when resistance (friction drag) changes – that is, as the system wears over time or if mechanisms are allowed to collect dust and debris

• All new electronics using Koskovich-designed & proven electronic technology – extremely reliable, solid-state circuit cards plug in & out

• Encoders, which provide cutting head and Transport position information to the servo systems, are now ultra-high resolution –– capable of registering 8000 measurement points within each revolution of a drive mechanism

• Reference to earth for determining precise cutting head angles is now provided by sealed Absolute-Angle Inclinometers

• New Windows XP Professional® operating software and Windows®-based operator interface (now in English and Spanish)

• New high-speed communications bus (PC to saw)

• Less susceptible to outside voltage and electronic "noise"

• Calibration is still rarely required and now much easier to accomplish

• Real time production reporting –– available at the operator computer console and/or remotely via computer network

• Descriptive diagnostic messages instead of look-up codes

• Software & firmware upgrades available via Internet from computer console – can also email-communicate with The Koskovich Company directly from saw

• Same footprint and electrical supply requirements as Auto-Omni

  Upgradeable:  New Servo-Omni is designed such that all options can be field installed and, also, with the intent that all future enhancements can be field installed.